Ultrasonic Anemometer 3D

The 3D Ultrasonic Anemometer measures the horizontal and vertical components of the wind speed and wind direction
Biral 4.3830.US3D
Home / Products / Ultrasonic Anemometer 3D

Overview

Overview

The 3D Ultrasonic Anemometer measures the horizontal and vertical components of the wind speed and wind direction. With no moving parts the anemometer is free from wear and maintenance and needs no calibration. The sensor arms are automatically heated if necessary ensuring continued operation in snow and during icing events. The electronics of the ultrasonic anemometer is based on the latest DSP (digital signal processor) technology.

The sensors can provide a very wide range of output parameters allowing use in the study of turbulence as well as more basic wind speed and direction measurement.

Measuring principle

Ultrasonic anemometers measure wind speed by detecting the difference in time taken for an ultrasonic pulse to travel in each direction between pairs of transducers caused by movement of the air. This method allows accurate measurement even at low wind speeds as there is no mechanical inertia to overcome. The lack of mechanical inertia also allows measurements to be taken at high frequency allowing precise time dependent measurement. Sonic temperature is also available in the output data.

A range of sensor variants is available to cover a wide range of applications.

Common Specifications

Wind Speed

Measuring range
0.01 - 85 m/s (up to 99m/s output)
Accuracy
±1% measured value 5m/s to 35m/s
Resolution
Up to 0.01m/s

Wind Direction

Measuring range Azimuth
0-360°
Measuring range Elevation
-90º to +90º
Resolution
Up to 0.1º
Accuracy
±1° 1m/s to 35m/s
Damping coefficient
0.2-0.3

Acoustic Temperature

Range
-40ºC to +70ºC
Accuracy
±0.5K
Resolution
0.1K

General

Data output serial
RS422 / RS485
Data output analogue
0-20mA, 0-10V or 4-20mA, 2-10V
Analogue inputs
Up to five possible
Operating voltage - Sensor
8-78VDC or 12-55 V AC 1.5W typical
Heating (Model Dependent)
24 V AC/DC; 150W
48 V AC/DC: 360W
Operating temperature
-50° to +80° C
Electrical connection
Multi-pin plug
Mounting
onto mast tube 1.5” Ø
Dimensions
Ø300 x 600 mm
Protection
IP67
Weight
3.4 Kg
Material of housing
Stainless steel

Available Variants

The sensor is available in a number of variants covering heating and data output options. For full details please follow the link: Thies_Ultrasonic_Options

Downloads

Sales & Support

Contact Biral for more information

To find out more about this instrument or to discuss your application requirements please do not hesitate to contact Biral.

After Sales Support

Biral offers free advice and technical support for the lifetime of the instruments we sell. Once you have purchased the unit you can always contact us for help using the links on our Service Support page.

Enquire about this product

"*" indicates required fields

Drop files here or
Max. file size: 8 MB.